RV LEVELING BLOCKS AND WHEEL CHOCKS

---

The Lynx Recreational Vehicle Leveling Kit. Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight. To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack. The levelers can also be used as a support base for other stabilizing equipment. Use under single and dual wheels, under tandem axles and under jacks. 8-1/2 inch x 8-1/2 inch with 1-1/2 inch thickness to give 1 inch lift. The 10 pack comes in an easy to store nylon bag and weighs less than ten RV parts and accessories pounds.

The Camco Heavy Duty Leveling Blocks, Ideal For Leveling Single and Dual Wheels, Hydraulic Jacks, Tongue Jacks and Tandem Axles (10 pack, Frustration-Free Packaging) Heavy duty blocks are safe and easy to use. They offer many options for leveling single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles. Customize your levels: Stack interlocking blocks to desired height. Strong and durable blocks are available in a ten-block set and a four-block build-up set. Patented. Each set comes in a convenient storage bag. RV parts and accessories

The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles.

The convenient carrying handle easily pulls up for carrying, or twists down to secure blocks together for storage. They have a strong, durable construction and are engineered with a patent-pending design to optimize both strength and weight. Resin is UV stabilized and built to last even when exposed to sunlight for extended periods of time. Bright, visible yellow color helps you see them so you don’t leave them behind. They can also be used to help prevent your stabilizers from sinking in soft ground. Camco's FasTen Leveling Blocks 4x2 measure 17 inch x 8-1/2 inch each and can be used with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. If dirt or debris build up in the leveling blocks, just knock it off and hose it out before storage. Stack height should not exceed 4-1/2 inches.

Once you have parked in your camp spot, use levels to determine whether or not your vehicle needs to be leveled. Determine the stack height needed and arrange the leveling blocks in front of the wheel in one of the approved configurations. Do not stack leveling blocks more than 4-1/2 inches high. Drive very carefully onto the blocks; it may be helpful to have a passenger step outside to guide. Once the vehicle is on the blocks and level, make sure to set the parking brake. When you’re ready to leave, simply drive off the blocks, park the vehicle, collect and stack the blocks, and twist in the included carrying handle. rv parts and accessories

Stabilizer Jack Pad

The Camco's RV Stabilizer Jack Pads are used to help prevent jacks from sinking into the ground. Use them with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. They have a built-in handle and a storage strap is included for easy storage. They are constructed of durable UV stabilized resin for years of use. Their heavy-duty construction and rib design are optimized for increased strength. Be sure to use with flat side down to help prevent slipping and sinking. Contains 4 jack pads. rv accessories

The Beech Lane Camper Leveler accurately levels campers, trailers, fifth wheels, airstreams, vans, and more in a flash. Can be used on RV's that have tire diameter of less than 32". Can be used on dual axle trailers - up to 4" of the leveler can be cut to fit if needed (see cutting instructions below for more info). The leveler measures 15" long, 6" wide, and 4" high.

Comes with 2 heavy duty levelers and 2 chocks and 2 custom rubber grip mats to prevent sliding while leveling (**grip mats are new for 2019**). The levelers no longer come with grip tape.

PATENT PENDING                                                                                                                                                                                   Can Be Cut To Size To Fit Dual Axle Campers

For dual axle trailers one leveler may need to be cut to length to fit in between the two tires. Up to 4" can be cut off each leveler with no adverse effects. The amount of space needed between tires to fit without cutting depends on tire size. Typically it is about 2.5" to 3" of space, but this varies with tire size. A miter saw is recommend for cutting as it will ensure a clean, straight cut. However, a hand saw can work as well, but it is recommended to clamp the leveler before cutting to help ensure a safe and clean cut. rv parts and accessories

The X-Chock starts off where the Deluxe Tire Locking Chock left off, but it's new, slimmer design will fit into more axle applications. Fits between tandem tires, it locks wheels by applying force to both tires. Aids in trailer stabilizing and prevents tire shifts. A hand operated plated ratchet wrench (Model 841025, included) turns a drive nut, extending the chocks against the tires for locking and retracting the chucks for removal. wheel chocks

The Valup Wheel Chocks are Strong and Durable Rubber Wheel Chocks with Extra-Long Rope

While many wheel chocks come with a connecting rope is never quite long enough, the Valup Rubber Wheel Chocks solve that problem by including a connecting rope 47’’ in length. This is 8 inches longer than the rope in most chocks, making the chocks perfect for larger vehicles.

Heavy Duty Wheel Chocks

The last thing you want to worry about when using wheel chocks for your vehicle or light aircraft is that they are not up to the job. Fortunately, the Valup Rubber Wheel Chocks are more than capable of providing strong and safe support.

Made from durable rubber, these solid chocks are robust, weather resistant, oil resistant, and much stronger than plastic versions. The non-slip rubber provides an added element of protection and ensures your vehicle will not roll away.

Perfect for Cars, Trucks, Airplanes, and More

These versatile wheel chocks are ideal for a wide range of uses. They are perfect for chocking cars, trucks, trailers, small airplanes, RVs, dumpsters, light aircraft, boats, horse trailers, vans, and more.

Choose from 1 or 2 Pairs

Choose from one pair of Valup Rubber Wheel Chocks, which contains 2 chocks, or two pairs, which contains 4 chocks in total.

Each individual chock measures 8.3” x 4.5” x 3.9” in size and weighs 4.2lbs, making them easy to place and pick up again. On top of that, each chock has a red stripe across it to increase visibility.

Get Solid Support for Your Vehicle

For solidity, security, and practicality, the Valup Rubber Wheel Chocks are unbeatable. These robust rubber chocks will provide you with all the support you need for any purpose, so buy yours today and chock your vehicle, boat, or aircraft securely and conveniently.

The MaxxHaul 2 pack 70472 Solid Rubber Heavy Duty Black Wheel Chocks are solid rubber wheel chocks feature all weather construction and a rubber traction pad that make them the perfect choice to keep your vehicle or trailer secure in any climate. The non-slip surface is oil resistant to provide superior traction. wheel chocks are lightweight yet durable enough to keep almost any vehicle or trailer in place.