The EPEVER 40A MPPT Charge Controller 12V 24V Auto, 40 amp Negative Grounded Solar Panel Charge Regulator MPPT Has Multiple load control modes: manual control, lighting ON/OFF, light On+Timer
Added Features(than Tracer A):
MT-50:
Package List:1 x Tracer 4210AN Solar Charge Controller1 x MT-50, 1 x Temp sensor,1 x RS485 Cable, 2 x Use Manual 12 / 24VDC automatically identifying system voltage
Looking to see our Top compact Washer List Along with Full wright ups CLICK HERE
The MidNite Solar Classic 250 MPPT Solar Charge Controller offers an industry first, an extended warranty for all the Classic MPPT charge controllers. Six months prior to the end of the warranty period customers can ship their Classic back to MidNite Solar with a check for $147 dollars plus shipping and we will replace any wearable parts and do a general tune-up. This will extend the warranty by 2 additional years, another good reason to purchase a Classic. The Classic 250 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your or the Internet. As with the whole Classic Line, the Classic 250 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.
The EPEVER MPPT Solar Charge Controller 40A Solar Panel Controller Negative Ground has smart battery protection system shields your device from getting over charged, over load, discharge, over heated, reverses polarity and also provides efficient short circuit protection. It can handle 520W Solar Panel on 12v battery system or 1040W Solar Panel on 24v battery system. Works equally great for home, industrial or commercial use. Designed for optimum and safe charging performance.
Technical Data
40A MPPT Charge Controller Nominal System Voltage: 12V, 24V
Rated Charge Current: 40A
Rated Load Current: 20A
Max PV Open Circuit Voltage: 150V / 138V
Max PV Input Power: 520W (12v battery) / 1040W (24v battery)
MT50 Remote Meter Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F
Remote Temperature Sensor Acquisition of battery temperature for undertaking temperature compensation of control parameters Length: 3 M
USB to RS485 Converter Adapter This adapter is used to monitor each controller on the network using Solar Station PC software and update the firmware. SolarEpic Tracer4215BN 40amp Solar Charge Controller Feature:
Looking to see our Top compact Washer List Along with Full wright ups CLICK HERE
SmatSolar MPPT Charge Controller, MFG# SCC110050210, 50 Amp. Remotely control and monitor your SmartSolar MPPT charger with built-in bluetooth via VictronConnect.
The AIMS Power SCC40AMPPT 40 Amp MPPT Solar Charge Controller; Charges 12, 24, 36 and 48 Volt Solar Systems; 4 Stage Charging; Battery Type Selector; Stackable; Over Temp Protection The AIMS Power Solar Charge Controller product line provides quality and reliable voltage regulation for your solar panel array. The AIMS MPPT charge controller uses an efficient algorithm to fully adjust with weather conditions to ensure that maximum power is harvested from the solar panel array throughout the day. With several size options, AIMS has a charge controller for every solar panel array. Key Features
Blue
PV Operating Voltage:
Rated PV input:
The FlexMax80 FM80-150VDC Charge Controller MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system. The FLEXmax Charge Controllers are the revolution. Developed by OutBack Power, its features include support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character-display shows the current status and logged system performance data for the last 128 days at the touch of a button. The FLEXmax family of charge controllers is the latest advanced improvement in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems. The ground-breaking FLEXmax MPPT software algorithm is both continuous and active, it increase your photovoltaic array power yield up to 30% compared to non-MPPT controllers. With the technology of active cooling and intelligent thermal management cooling, the FLEXmax charge controllers can operate at their full maximum current rating in ambient temperatures as high as 104F (40C) (Optional Remote Temp Sensor Recommended for optimal operation- Sold separately). . Features: Built-in 128 days of Data Logging Programmable Auxiliary Control Output. Fully OutBack Network Integration Capable (with use of the OutBack HUB - Sold separately). Programmable Battery Voltages from 12 VDC to 60 VDC. Advanced Continuous Maximum Power Point Tracking Increases PV Array Output by up to 30%. Specifications: Nominal Battery Voltages: 12, 24, 36, 48
The Renogy Commander 20 Amp 12V/24V MPPT Negative Ground Solar Charge Controller Allows you to Take command of your off-grid solar power system with this new and improved 20A MPPT charge controller. Unlike a basic PWM Controller, this charge controller is compatible with sealed lead-acid, flooded, and gel batteries (all deep cycle). The Commander keeps your batteries from becoming over-charged or over-discharged, increasing the longevity of your batteries. This high tech controller features Multiphase Synchronous Rectification and Maximum Power Point Tracking technologies, which increases charging efficiency and improves system performance. And with the included MT-50 Tracer Meter you will have full control over your controller. Take your power system up a notch with the 20A Commander Charge Controller.
Specifications
Nominal System Voltage: 12V/24V Auto recognition
Rated Battery Current: 20A
Max. Solar Input Voltage: 150VDC
Maximum Battery Voltage: 32V
Communication: RSJ45
Dimensions: 8.52 x 5.61 x 2.20 inches
Max. Terminal: 10mm2, 8 AWG
The Renogy 20A/30A/40A Rover PG MPPT Charge Controller is an intelligent positive ground controller. Built with protections against reverse polarity, short-circuiting, overheating, and more, this MPPT controller is also capable of self-diagnosing itself in the event of an error.
It can automatically detect 12V/24V systems. Pair this charge controller with the Renogy BT-1 and Renogy BT app to view your system's performance in real time and make parameter changes straight from your smart device.
Compatible with 12V and 24V systems. Also compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium (12.8V LFP).
Copyright © 2019 Full-Time RV Living - All Rights Reserved. Full-Time RV is an Amazon Associate and earns from qualifying purchases.
Full-Time RV